6.0# Rahr American 6-row Malt
3oz Briess Crystal 10L
0.4# Rice Syrup Solids (5 min)
0.4# Corn Sugar (5 min)
1.0g BrewTan B (dissolved in warm water, mash)
1ml Hopshot (60 min)
14g Fuggle (1 min)
Wyeast Nutrient
4.66g BCAA (Dissolved in warm water, 5 min)
0.5 Whirlfloc
Wyeast 2007 Pilsen Lager
Protein rest at 122F -130F for 20 min, then raise to 149F for the duration of the mash. Collect 4.5 - 4.75 gallons of wort, then top up to 6.75 gallons total boil volume. 90 minute boil. Ferment at 52F.
Water Profile - To 10 gallons of RO water add:
3.8g Gypsum
3.2g Epsom Salts
4.9g Calcium Chloride
Brewing Notes
I had some problems during the last brew session with the grain bed compacting. I'd tightened up the gap on my grain mill for an earlier batch, and I'd forgotten to open it back up to my normal gap (0.045) and that seems to have been the cause of the problem. There were no issues recirculating the mash today.
Brewing Notes
I had some problems during the last brew session with the grain bed compacting. I'd tightened up the gap on my grain mill for an earlier batch, and I'd forgotten to open it back up to my normal gap (0.045) and that seems to have been the cause of the problem. There were no issues recirculating the mash today.
- First running - 17.6 brix (1.070)
- Pre-boil - 6.0 (1.023) *after topping up, before adding rice and corn sugars
- Post-boil - 10.0 (1.039, Tilt = 1.042) *after adding rice and corn sugars
I ended up with a little over 5 gallons. I probably boiled a little softer than typical, trying to avoid any extra caramelization in the kettle.
Update 1/27/2020
About 24 hours in and gravity has dropped to ~1.037.
Update 1/28/2019
A little shy of 48 hours in and we're down to ~1.029.
Update 2/10/2020
This was kegged today along with 6ml of Biofine Clear.
No comments:
Post a Comment